Fixed Monitoring

• What is the Notion Lite for?

  The Notion Lite is a temperature monitoring solution ideal for retail food outlets, pharmacies, medical clinics, smaller food processing plants and temperature controlled storage facilities. It is very simple to set-up and use and offers immediate access to real-time data, alarms and audit ready reports.

• How does the Notion Lite work?
• What do I need in order to use the Notion Lite?

  A basic set-up requires a base station, temperature transmitter, power supply, Ethernet cable and subscription voucher. A starter kit is available (see product code: ‘NL-LK003F1’). The product code for the voucher is ‘NL-W613’. The starter kit includes 3 temperature transmitters. Additional temperature transmitters are also available – see our product code NL-WT001F1

• Will I need software to use the Notion Lite system?

  No, you will only be required to register for your online account. Once this is done, you will be able to access and manage your data whenever you wish via an internet browser.

• How long will my Notion Lite online subscription last and will I run out of data storage?

  One voucher will give you a year subscription with unlimited storage.

• What if I need more than 10 temperature transmitters?

  Please contact us for details of our Notion Pro.

• What if I have multi-site facilities?

  Please contact us for details of our Notion Pro

• What is the TCWall Port?

  The TC Wall Port is a wall-mounted temperature monitoring point, connected to a fine wire thermocouple temperature sensor. The tip of the sensor is permanently installed on the surface of the item you wish to take the temperature of, such as a water pipe or TMV inlet. Simply plug your thermometer into the port with a connector cable for an instant temperature reading. The port can be sited up to twenty metres from the test point making it ideal for use with boxed-in pipes and valves or pipes and water tanks located at height or in areas where access is difficult.

• What is the purpose of the Red and Blue colour options for the TC Wall Port?

  Engineers often need to monitor both hot and cold pipes at the same location. The Red and Blue ports make it easy to tell which is hot and which is cold.

• Can I use any thermometer with the TCWall Port?

  You will need a digital thermocouple thermometer with mini-plug input socket in order to read temperatures from your wall ports. We recommend our MM2008 Legionella Thermometer. You will also need a KMPC cable (such as the KMPC2MP) to connect your thermometer to the Wall Port. Thermistor and PT100 thermometers are not compatible with this product

• Does the TC Wall Port system replace conventional temperature monitoring?

  The TC Wall Port system happily works alongside conventional temperature monitoring using handheld immersion and surface probes. Its main advantage lies in simplifying temperature monitoring of points which are boxed-in or are difficult to access. If you have any doubts regarding the implementation of a water temperature monitoring regime in your building, you should consult your risk assessment and adhere to any recommendations contained therein.

• Can I use a TC Wall Port to measure temperature of water in a CWST?

  Yes. We recommend using a KM07 immersion probe to be hung in the tank and run to the Wall Port. This comes with a two metre cable as standard. Other lengths are available on request. Please see the diagram illustrating this on the TC Wall Port product page of our website.

• Can I use TC Wall Ports to measure flow and return pipe temperatures on calorifiers?

  Yes. Simply attach a fine wire sensor to each pipe and connect each one to a Wall Port sited in a convenient position. We recommend using high-temperature duct tape to fix the sensors to the pipes.