TCWALLPORTR - Thermocouple Temperature Monitoring Point- RED

Product Code: TCWALLPORTR

Ask a question (7)

Availability: In stock

£16.00
(VAT, where applicable, will be added at checkout)

TCWallport-Red.jpg

Click on above image to view full picture

More Views

  • TCWallport-Red.jpg
  • TCWallPortR_Water_Tank_at_Height
  • TCWallPortR_Boxed_in_TMV_Valves
  • TCWallPortR_Easy_access_For_boxed_in_Pipe_Work

Description

This connection box is perfect for areas where a spot check is necessary on a test point with difficult or impaired access.

Designed with a red front cover for hot water test points

The box measures 52 x 52 x 23mm

The TCWALLPORTR is primarily designed for use with a fine wire thermocouple temperature sensor which is attached to the temperature test point and left in-situ.

The wire is then run to the port which can be sited in a convenient position up to 20 metres away. Temperature is read by simply plugging a hand-held thermometer into the port (KMPC connection cable required).


Can be used with:

T or K Thermocouple Probes such as:

• Fine Wire Probes

• Velcro Probes

• Rubber Patch Probes

• Immersion Probes

You may also be interested in the following product(s)

KA02-10 - K Type F/Glass  Fine Wire Thermocouple 10m x 0.3mm

KA02-10 - K Type F/Glass Fine Wire Thermocouple 10m x 0.3mm

£22.50
(VAT, where applicable, will be added at checkout)
KA02-20 - K Type F/ Glass Fine Wire Thermocouple 20m x 0.3mm

KA02-20 - K Type F/ Glass Fine Wire Thermocouple 20m x 0.3mm

£37.50
(VAT, where applicable, will be added at checkout)
KA02-3 - K Type F/ Glass  Fine Wire Thermocouple 3m x 0.3mm

KA02-3 - K Type F/ Glass Fine Wire Thermocouple 3m x 0.3mm

£9.55
(VAT, where applicable, will be added at checkout)
KA02-5 - K Type F/ Glass  Fine Wire Thermocouple 5m x 0.3mm

KA02-5 - K Type F/ Glass Fine Wire Thermocouple 5m x 0.3mm

£12.05
(VAT, where applicable, will be added at checkout)
TA01-10 - T Type  PTFE Fine Wire Thermocouple 10m x 0.3mm

TA01-10 - T Type PTFE Fine Wire Thermocouple 10m x 0.3mm

£17.75
(VAT, where applicable, will be added at checkout)
TA01-3 - T Type PTFE Fine Wire Thermocouple 3m x 0.3mm

TA01-3 - T Type PTFE Fine Wire Thermocouple 3m x 0.3mm

£5.50
(VAT, where applicable, will be added at checkout)
TA01-5 - T Type  P.T.F.E Fine Wire Thermocouple 5m x 0.3mm

TA01-5 - T Type P.T.F.E Fine Wire Thermocouple 5m x 0.3mm

£10.75
(VAT, where applicable, will be added at checkout)
TA02-10 - T Type F/Glass Fine Wire Thermocouple 10m x 0.3mm

TA02-10 - T Type F/Glass Fine Wire Thermocouple 10m x 0.3mm

£22.75
(VAT, where applicable, will be added at checkout)
TA02-20 - T Type F/Glass Fine Wire Thermocouple 20m x 0.3mm

TA02-20 - T Type F/Glass Fine Wire Thermocouple 20m x 0.3mm

£37.75
(VAT, where applicable, will be added at checkout)
TA02-3 - T Type F/Glass Fine Wire Thermocouple 3m x 0.3mm

TA02-3 - T Type F/Glass Fine Wire Thermocouple 3m x 0.3mm

£9.80
(VAT, where applicable, will be added at checkout)
TA02-5 - T Type F/Glass Fine Wire Thermocouple 5m x 0.3mm

TA02-5 - T Type F/Glass Fine Wire Thermocouple 5m x 0.3mm

£12.30
(VAT, where applicable, will be added at checkout)
KA02 - K Type F/ Glass  Fine Wire Thermocouple 1m x 0.3mm

KA02 - K Type F/ Glass Fine Wire Thermocouple 1m x 0.3mm

£6.50
(VAT, where applicable, will be added at checkout)
TA01- T Type PTFE Fine Wire Thermocouple 1m x 0.3mm

TA01- T Type PTFE Fine Wire Thermocouple 1m x 0.3mm

£4.75
(VAT, where applicable, will be added at checkout)
TA02 -T Type F/ Glass  Fine Wire Thermocouple 1m x 0.3mm

TA02 -T Type F/ Glass Fine Wire Thermocouple 1m x 0.3mm

£6.75
(VAT, where applicable, will be added at checkout)
KPA01- K Type PTFE Fine Wire T/C 1m x 0.2mm with s/a Patch

KPA01- K Type PTFE Fine Wire T/C 1m x 0.2mm with s/a Patch

£5.75
(VAT, where applicable, will be added at checkout)
TPA01 - T Type PTFE Fine Wire T/C 1m x 0.2mm with s/a Patch

TPA01 - T Type PTFE Fine Wire T/C 1m x 0.2mm with s/a Patch

£4.75
(VAT, where applicable, will be added at checkout)
KRP01 - K Type Rubber Patch Probe 1m 7/0.2mm PFA Cable

KRP01 - K Type Rubber Patch Probe 1m 7/0.2mm PFA Cable

£24.00
(VAT, where applicable, will be added at checkout)
TRP01 - T Type Rubber Patch Probe 1m PTFE cable w/ mini plug

TRP01 - T Type Rubber Patch Probe 1m PTFE cable w/ mini plug

£24.00
(VAT, where applicable, will be added at checkout)
KMPC2MP - K Type 2m Curly Cable Mini Plug to Mini  Plug

KMPC2MP - K Type 2m Curly Cable Mini Plug to Mini Plug

£15.00
(VAT, where applicable, will be added at checkout)
TMPC2MP - T Type 2m Curly Cable Mini Plug to Mini Plug

TMPC2MP - T Type 2m Curly Cable Mini Plug to Mini Plug

£15.00
(VAT, where applicable, will be added at checkout)
TMPC1MP - T Type 1m Curly Cable Mini Plug to Mini Plug

TMPC1MP - T Type 1m Curly Cable Mini Plug to Mini Plug

£9.50
(VAT, where applicable, will be added at checkout)
KMPC1MP - K Type 1m Curly Cable Mini Plug to Mini Plug

KMPC1MP - K Type 1m Curly Cable Mini Plug to Mini Plug

£9.50
(VAT, where applicable, will be added at checkout)
TMP1MP - T Type 1m PFA Flat Twin Cab. Mini Plug to Mini Plug

TMP1MP - T Type 1m PFA Flat Twin Cab. Mini Plug to Mini Plug

£12.00
(VAT, where applicable, will be added at checkout)
 

Additional Information

Like To Read

Hard to reach? Legionella experts launch new solution to problem temperature points

Facilities and premises managers faced with the problem of monitoring hard to reach water temperature points now have the ideal solution thanks to a handy new device from TM Electronics, market leaders in temperature measurement for legionella risk management.

Read More

 

 

 


 

Who Cares About Temperature?

Care service managers faced with a growing raft of health and safety legislation may be overlooking the issue of temperature safety, warns thermometer manufacturer, TM Electronics, raising the profile of correct temperature management in care homes and assisted-living accommodation.

Read More

 

 

 


 

Spotlight on Temperature – Advice for Care Homes

Concerns about temperature safety are a hot topic of conversation for nursing and care home managers, as increased due diligence on health and safety regulations puts temperature increasingly under the spotlight. Clinical thermometers are well-understood and easy to source but are just the tip of the iceberg.

Read More

 

 

 


 

Help For Schools With In-House Legionella Tests

UK thermometer manufacturer, TM Electronics, is seeing increased sales of DIY legionella testing kits to schools carrying out in-house water temperature testing to reduce the risk of Legionnaires’ disease.

Read More

 

 

Product Faqs

  • What is the purpose of the Red and Blue colour options for the TC Wall Port?

    Engineers often need to monitor both hot and cold pipes at the same location. The Red and Blue ports make it easy to tell which is hot and which is cold.

  • Can I use any thermometer with the TC Wall Port?

    You will need a digital thermocouple thermometer with mini-plug input socket in order to read temperatures from your wall ports. We recommend our MM2008 Legionella Thermometer. You will also need a KMPC cable (such as the KMPC2MP) to connect your thermometer to the Wall Port .Thermistor and PT100 thermometers are not compatible with this product

  • How do I work out what I need?

    First count up the number of test points you wish to monitor. Next decide where you wish to site each Wall Port to conveniently measure each temperature point from. Finally calculate the length of fine wire temperature sensor required for each Wall Port. These are available in lengths of one,three,five,ten and twenty metres.

  • Does the TC Wall Port system replace conventional temperature monitoring?

    The TC Wall Port system happily works alongside conventional temperature monitoring using handheld immersion and surface probes. Its main advantage lies in simplifying temperature monitoring of points which are boxed-in or are difficult to access. If you have any doubts regarding the implementation of a water temperature monitoring regime in your building, you should consult your risk assessment and adhere to any recommendations contained therein.

  • Can I use a TC Wall Port to measure temperature of water in a CWST?

    Yes. We recommend using a KM07 immersion probe to be hung in the tank and run to the Wall Port. This comes with a two metre cable as standard. Other lengths are available on request. Please see the diagram illustrating this on the TC Wall Port product page of our website.

  • Can I use TC Wall Ports to measure flow and return pipe temperatures on calorifiers?

    Yes. Simply attach a fine wire sensor to each pipe and connect each one to a Wall Port sited in a convenient position. We recommend using high-temperature duct tape to fix the sensors to the pipes.

  • What is the TC Wall Port?

    The TC Wall Port is a wall-mounted temperature monitoring point, connected to a fine wire thermocouple temperature sensor. The tip of the sensor is permanently installed on the surface of the item you wish to take the temperature of, such as a water pipe or TMV inlet. Simply plug your thermometer into the port with a connector cable for an instant temperature reading. The port can be sited up to twenty metres from the test point making it ideal for use with boxed-in pipes and valves or pipes and water tanks located at height or in areas where access is difficult.