TME KA01-3_Fine_Wire_Temperature_Probe

KA01-3 - K Type PTFE Fine Wire Thermocouple 3m x 0.3mm

TME_KA01-10_Fine_Wire_Temperature_Probe

KA01-10 - K Type PTFE Fine Wire Thermocouple 10m x 0.3mm

KA01-5 - K Type PTFE Fine Wire Thermocouple 5m x 0.3mm

£10.50
Availability: In stock
SKU
KA01-5

Compatible Products



Description

KA01-5 Fine Wire Probe - Used for applications such as air, liquid or surface temperatures

Features

Thermocouple Type - K

Accuracy - Class I (±1.5°C ±0.25%)

Measurement Range -100 to 250°C

Length - 5 meter

Diameter - 0.3mm

Plug Type - Moulded 2 pin

Requires: A digital thermocouple thermometer.

For General Use we recommend the TME MM2000 Digital Handheld Thermocouple Thermometer

For Legionella Use we recommend the TME MM2008 Digital Handheld with Integral Timer

For Next Generation Bar Code Scanning Temperature Monitoring we recommend the TME MM7000-2D ThermoBarScan Thermometer

Write Your Own Review
You're reviewing:KA01-5 - K Type PTFE Fine Wire Thermocouple 5m x 0.3mm
Your Rating

No Related Posts

Product Faqs

Ask a Question




Ask a Question


Sort by   
  • What is the difference between a thermometer and a probe?
    Question by: admin on 2018-09-05 11:51:38

    Simply put, the thermometer is the ‘box’, where you will see a screen that displays measurements, and the probe is the thing connected to it. So the probe (or sensor), senses the temperature and sends a signal to the thermometer, which translates it into a figure (usually °C or °F) and displays it. Probes can come in many different varieties which are designed to suit a specific application (such as needle probes, flat food probes, air probes etc). Thermometers, too, can have many different applications in addition to displaying a temperature reading. Some thermometers have a hold function, or can calibrate other thermometers, scan barcodes or wirelessly send temperature readings to other electronic equipment such as PCs or PDAs.

    Answer by: admin on 2018-10-03 01:30:05
  • I regularly need to replace my thermometers and probes, can I set up a service contract to cover the cost?
    Question by: admin on 2018-06-18 12:41:03

    If you have purchased a large number of TME thermometers/probes, and are likely to have a high turnover of breakages, we offer a swap service which charges a set monthly rate in return for an unlimited number of swaps. We can offer this on a next day basis. If you are interested in the swap system, please phone or email TME for advice on how best to set it up.

    Answer by: admin on 2018-09-05 10:27:42
  • What is the warranty on my probe?
    Question by: admin on 2018-06-18 10:51:17

    TME probes do not come with a warranty, however, if there is a fault in our manufacturing process we will of course replace for free.

    Answer by: admin on 2018-09-05 10:25:13
  • Can I calibrate a probe?
    Question by: admin on 2018-06-15 13:58:39

    Yes. We can produce a calibration certificate for a probe to either the four standard points (for food applications: -20, 0, +20 & 80 C, for Legionella applications: 0, 20, 55 & 100 C) or to four points of your choosing. Please note: for probes being returned to us for calibration, whilst it is possible to produce a certificate for a probe, we will not be able to adjust any errors found during the test.

    Answer by: admin on 2018-06-15 01:58:39