MMCombi-W -MM2000 Digital Thermometer in White with Needle

Product Code: MMCOMBI-W

Ask a question (11)

Availability: In stock

(VAT, where applicable, will be added at checkout)


Click on above image to view full picture

More Views

  • MMCombi-W_HandheldThermometerwithNeedleProbe.JPG
  • MMCombi-W_HandheldThermometerwithNeedleProbe_Specifications


This high accuracy, water resistant thermometer has a simple point-and-probe action, meaning there's no worry about trailing wires or plug in connections. Fully HACCP compatible.

• High Accuracy

• Splash-proof case with waterproof probe

• Simple point-and-probe action

• No trailing wires

• No plug-in connection

• Battery powered

• HACCP compatible

• Needle Probe supplied with 1m length cable

You may also be interested in the following product(s)

TEMPRB - Temperature Record Log Book

TEMPRB - Temperature Record Log Book

(VAT, where applicable, will be added at checkout)
PWIPES - Tub of 200 Probe Wipes

PWIPES - Tub of 200 Probe Wipes

(VAT, where applicable, will be added at checkout)

Additional Information

Like To Read

Who Cares About Temperature?

Care service managers faced with a growing raft of health and safety legislation may be overlooking the issue of temperature safety, warns thermometer manufacturer, TM Electronics, raising the profile of correct temperature management in care homes and assisted-living accommodation.

Read More



ThermaSprint from TME - the fastest temperature probes on the market

Throughout the temperature monitoring industry speed and strength are of paramount concern when choosing a temperature probe – especially in the food, hospitality and catering sectors. “There’s nothing more frustrating than a probe which takes ages to come up to temperature – or worse still – breaks off in your hand,” says temperature specialist, Tom Sensier. “That’s why TME has developed ThermaSprint.”

Read More




Product Faqs

  • Is the MM2000 range of thermometers waterproof?

    Yes. The MM2000 range of thermometers is waterproof to IP67 standard, meaning that it is submersible.

  • Is my MM2000 range thermometer still waterproof without its rubber boot?

    Yes. The rubber boots that come with MM2000 range thermometers are intended to increase the shock-proofing of the instruments. They have no effect on the waterproofing.

  • How do I activate my MM2000 range thermometers’ Thermometer for Life policy?

    If you purchase an MM2000 range thermometer, whether directly from TME or from one of our suppliers, you automatically qualify for the Thermometer for Life policy. If your thermometer breaks, simply send it back to TME’s production department, who will repair/replace it for no more than £35. This is a lifelong guarantee and does not affect your standard 2 year warranty.

  • How do I turn my MM2000 range thermometer on and off?

    Different thermometers within the MM2000 range have different configurations of buttons, but the on/off button is the same for all of them. Simply press the top left hand button:   once to turn the thermometer on, and again to turn it off.

  • How can I switch between °F and °C?

    All you need to do to switch between °F and °C on MM2000 range thermometers is press the SCALE button (SCL).

  • Does my MM2000 range thermometer come with a battery?

    Yes it does. Your MM2000 range thermometer comes with one standard 9 volt PP3 battery.

  • How long will the battery in my MM2000 range thermometer last?

    It depends on how much you use it, but the battery should last for more than 200 hours of intermittent use.

  • How do I replace the battery in my MM2000 range thermometer?

    Replacing the battery in your MM2000 range thermometer is very easy. Simply remove the protective rubber boot, open the battery compartment in the back of the thermometer, remove the battery and replace with a new one.

  • Do all TME digital handheld thermometers come with a battery?

    Yes. All out digital handheld thermometers come supplied with a 9v PP3 battery.

  • How long will the battery last?

    The battery should last for more than 200 hours of intermittent use, although it will depend on how much it is used.

  • What does 'self-calibrating' mean

    All our instruments have a voltage reference, and they use this to check their own calibration “ Self-Calibrating”. However although this gives us excellent long term stability for many customers they also require an annual calibration check or certificate to external sources.