TC Wall Port Installation Guide

 The TC Wall Port is designed to be used with an external thermocouple temperature probe with mini-plug such as the KA01 or KM07

To install, firstly attach the probe sensor to the object you wish to monitor using a TAPS adhesive pad or similar tape. Run the probe wire to a convenient position (probes are available from 1 – 20 metres in length). Fix the Wall Port back panel to the wall using the slotted screw holes provided, or suitable adhesive tape.

 

 

Next, plug the probe wire into the socket in the BACK of the face plate as shown below ensuring the neck of the plug sits in the aperture in the face plate (see below)

 

 

Now fix the face plate to the back plate using the screws provided.  Connect your thermocouple thermometer to the port using a plug-to-plug cable and read the temperature.

 

 

The thermometer shown above is our MM2008

The plug to plug cable is KMPC1MP