Made In Britain

Delivering to UK-EU-Worldwide


TCWALLB-KA01-01 - Blue TCWallPort with integral 1m K Type Fine Wire Probe

TCWALLR-KA01-01 - Red TCWallPort with Integral 1m K Type Fine Wire Probe

Availability: In stock


TCWALLR-KA01-01 - Red thermocouple temperature monitoring point with an integral K Type fine wire probe for hot test points with difficult/impaired access, such as taps and pipework.



Colour coded Red to help identify Hot Monitoring Point

Easy installation - the user can choose as to whether the fine wire extends from either the side or rear of the TCWALLPORT.

Thermocouple Type - K

Accuracy - Class I (±1.5°C ±0.25%)

Measurement Range -100 to 250°C

Probe Dimensions - 1m x 0.3mm

Box Dimensions – 52 x 52mm

Constructed from durable ABS plastic with a splash-proof design.

Front plate space for location/identification label or barcode label – Note : label not included


Requires: A digital thermocouple thermometer and Connection Cable



Handheld thermometer:

For Legionella Use we recommend the TME MM2008 Digital Handheld with Integral Timer

For Next Generation Bar Code Scanning Temperature Monitoring we recommend the TME MM7000-2D ThermoBarScan Thermometer


Connection Cable:

To connect between a handheld thermometer and the TCWALLR-KA01-01 we recommend the TME KMPC1MP

More Information
Compatible Products Link http://
Write Your Own Review
You're reviewing:TCWALLR-KA01-01 - Red TCWallPort with Integral 1m K Type Fine Wire Probe
Your Rating

Related Posts

Product Faqs

Ask a Question

Ask a Question

Sort by   
  • What is the difference between a thermometer and a probe?
    Question by: admin on 2018-09-05 11:51:38

    Simply put, the thermometer is the ‘box’, where you will see a screen that displays measurements, and the probe is the thing connected to it. So the probe (or sensor), senses the temperature and sends a signal to the thermometer, which translates it into a figure (usually °C or °F) and displays it. Probes can come in many different varieties which are designed to suit a specific application (such as needle probes, flat food probes, air probes etc). Thermometers, too, can have many different applications in addition to displaying a temperature reading. Some thermometers have a hold function, or can calibrate other thermometers, scan barcodes or wirelessly send temperature readings to other electronic equipment such as PCs or PDAs.

    Answer by: admin on 2018-10-03 01:30:05
  • Can I use TC Wall Ports to measure flow and return pipe temperatures on calorifiers?
    Question by: admin on 2018-06-21 12:06:20

    Yes. Simply attach a fine wire sensor to each pipe and connect each one to a Wall Port sited in a convenient position. We recommend using high-temperature duct tape to fix the sensors to the pipes.

    Answer by: admin on 2018-06-21 12:06:20
  • Can I use a TC Wall Port to measure temperature of water in a CWST?
    Question by: admin on 2018-06-21 11:27:18

    Yes. We recommend using a KM07 immersion probe to be hung in the tank and run to the Wall Port. This comes with a two metre cable as standard. Other lengths are available on request. Please see the diagram illustrating this on the TC Wall Port product page of our website.

    Answer by: admin on 2018-06-21 11:27:18
  • Does the TC Wall Port system replace conventional temperature monitoring?
    Question by: admin on 2018-06-21 11:23:25

    The TC Wall Port system happily works alongside conventional temperature monitoring using handheld immersion and surface probes. Its main advantage lies in simplifying temperature monitoring of points which are boxed-in or are difficult to access. If you have any doubts regarding the implementation of a water temperature monitoring regime in your building, you should consult your risk assessment and adhere to any recommendations contained therein.

    Answer by: admin on 2018-09-05 10:52:03
  • Can I use any thermometer with the TCWall Port?
    Question by: admin on 2018-06-20 14:56:29

    You will need a digital thermocouple thermometer with mini-plug input socket in order to read temperatures from your wall ports. We recommend our MM2008 Legionella Thermometer. You will also need a KMPC cable (such as the KMPC2MP) to connect your thermometer to the Wall Port. Thermistor and PT100 thermometers are not compatible with this product

    Answer by: admin on 2018-10-03 01:57:27
  • What is the purpose of the Red and Blue colour options for the TC Wall Port?
    Question by: admin on 2018-06-20 14:48:08

    Engineers often need to monitor both hot and cold pipes at the same location. The Red and Blue ports make it easy to tell which is hot and which is cold.

    Answer by: admin on 2018-06-20 02:48:08
  • What is the TCWall Port?
    Question by: admin on 2018-06-20 14:45:08

    The TC Wall Port is a wall-mounted temperature monitoring point, connected to a fine wire thermocouple temperature sensor. The tip of the sensor is permanently installed on the surface of the item you wish to take the temperature of, such as a water pipe or TMV inlet. Simply plug your thermometer into the port with a connector cable for an instant temperature reading. The port can be sited up to twenty metres from the test point making it ideal for use with boxed-in pipes and valves or pipes and water tanks located at height or in areas where access is difficult.

    Answer by: admin on 2019-06-06 10:03:27
  • I regularly need to replace my thermometers and probes, can I set up a service contract to cover the cost?
    Question by: admin on 2018-06-18 12:41:03

    If you have purchased a large number of TME thermometers/probes, and are likely to have a high turnover of breakages, we offer a swap service which charges a set monthly rate in return for an unlimited number of swaps. We can offer this on a next day basis. If you are interested in the swap system, please phone or email TME for advice on how best to set it up.

    Answer by: admin on 2018-09-05 10:27:42
  • What is the warranty on my probe?
    Question by: admin on 2018-06-18 10:51:17

    TME probes do not come with a warranty, however, if there is a fault in our manufacturing process we will of course replace for free.

    Answer by: admin on 2018-09-05 10:25:13
  • Can I calibrate a probe?
    Question by: admin on 2018-06-15 13:58:39

    Yes. We can produce a calibration certificate for a probe to either the four standard points (for food applications: -20, 0, +20 & 80 C, for Legionella applications: 0, 20, 55 & 100 C) or to four points of your choosing. Please note: for probes being returned to us for calibration, whilst it is possible to produce a certificate for a probe, we will not be able to adjust any errors found during the test.

    Answer by: admin on 2018-06-15 01:58:39
  • Can I get a calibration certificate on this item?
    Question by: admin on 2018-06-15 09:53:42

    Yes. This would be for our standard UKAS traceable certificate. Prices start at £35.00. Please email with the four temperature points required.

    Answer by: admin on 2018-10-03 01:31:48