Made In Britain

Delivering to UK-EU-Worldwide

TME-MM2008-Thermocouple-Handheld-Thermometer-with-Timer

MM2008 - Legionella Thermometer w/ Integral 1 & 2 Minute Timers

TCWall-KA01-C - Single Socket TCWallPort with Integral K Fine Wire Probe Various Lengths

TCWALL-KA01-C - Single TCWallPort w/Integral K Fine Wire in Various Lengths

TCWALLPORT-C - Thermocouple Monitoring Point in Various Options

As low as £16.00
Availability: In stock
SKU
TCWALLPORT-C

TCWallport – Remote Temperature Monitoring Point

 

TME Compatible Products



Description

TCWALLPORT-C thermocouple temperature monitoring point. Designed to be used in conjunction with a suitable probe for remote temperature measurement up to 20 metres with no loss of accuracy. Miniature thermocouple socket. For accurate spot checks on test points with difficult/impaired access: cold storage, ovens, tanks, pipes.

Easy to use: can be easily wall mounted, compatible with all standard thermocouple thermometers and probes;

Available in 3 options:

• White – can be used anywhere for a wide range of temperature applications

• Blue – ideal where visual indication of cold temperature monitoring is required

• Red – ideal in areas where visual indication of hot temperature monitoring is required

Features:

• Splash-proof, compact and unobtrusive

• For accurate spot checks on test points with difficult access up to 20 metres

• Easy to mount on a wall, compact, unobtrusive

• Compatible with K and T type sensors

• Splash-proof

• Measures 52mm x 52mm

• Constructed from durable ABS plastic with a splash-proof design

 

Requires: a Digital thermocouple thermometer, probe and Connection cable.

 MM2008 with Connection Cable, TCWallport and Fine Wire Connection

Recommendations:

Handheld thermometer:

For Legionella Use we recommend the TME MM2008 Digital Handheld with Integral Timer

For Next Generation Bar Code Scanning Temperature Monitoring we recommend the TME MM7000-2D ThermoBarScan Thermometer

Connection Cable:

To connect between a handheld thermometer and the TCWALLPORT we recommend the TME KMPC1MP

Probe:

To run from the TCWALLPORT to the point being tested we recommend the TME Range of K Type Fine Wire Probes


For General Use select from the following for other languages

French Flad   Italian Flag   Spainish Flag   German Flag


For Food Use descriptions select from the following

United Kingdom Flag  French Flag Italian Flag Spanish Flag German Flag

Write Your Own Review
You're reviewing:TCWALLPORT-C - Thermocouple Monitoring Point in Various Options
Your Rating

Related Posts

Product Faqs

Ask a Question




Ask a Question


Sort by   
  • Can I use TC Wall Ports to measure flow and return pipe temperatures on calorifiers?
    Question by: admin on 2018-06-21 12:06:20

    Yes. Simply attach a fine wire sensor to each pipe and connect each one to a Wall Port sited in a convenient position. We recommend using high-temperature duct tape to fix the sensors to the pipes.

    Answer by: admin on 2018-06-21 12:06:20
  • Can I use a TC Wall Port to measure temperature of water in a CWST?
    Question by: admin on 2018-06-21 11:27:18

    Yes. We recommend using a KM07 immersion probe to be hung in the tank and run to the Wall Port. This comes with a two metre cable as standard. Other lengths are available on request. Please see the diagram illustrating this on the TC Wall Port product page of our website.

    Answer by: admin on 2018-06-21 11:27:18
  • Does the TC Wall Port system replace conventional temperature monitoring?
    Question by: admin on 2018-06-21 11:23:25

    The TC Wall Port system happily works alongside conventional temperature monitoring using handheld immersion and surface probes. Its main advantage lies in simplifying temperature monitoring of points which are boxed-in or are difficult to access. If you have any doubts regarding the implementation of a water temperature monitoring regime in your building, you should consult your risk assessment and adhere to any recommendations contained therein.

    Answer by: admin on 2018-09-05 10:52:03
  • Can I use any thermometer with the TCWall Port?
    Question by: admin on 2018-06-20 14:56:29

    You will need a digital thermocouple thermometer with mini-plug input socket in order to read temperatures from your wall ports. We recommend our MM2008 Legionella Thermometer. You will also need a KMPC cable (such as the KMPC2MP) to connect your thermometer to the Wall Port. Thermistor and PT100 thermometers are not compatible with this product

    Answer by: admin on 2018-10-03 01:57:27
  • What is the purpose of the Red and Blue colour options for the TC Wall Port?
    Question by: admin on 2018-06-20 14:48:08

    Engineers often need to monitor both hot and cold pipes at the same location. The Red and Blue ports make it easy to tell which is hot and which is cold.

    Answer by: admin on 2018-06-20 02:48:08
  • What is the TCWall Port?
    Question by: admin on 2018-06-20 14:45:08

    The TC Wall Port is a wall-mounted temperature monitoring point, connected to a fine wire thermocouple temperature sensor. The tip of the sensor is permanently installed on the surface of the item you wish to take the temperature of, such as a water pipe or TMV inlet. Simply plug your thermometer into the port with a connector cable for an instant temperature reading. The port can be sited up to twenty metres from the test point making it ideal for use with boxed-in pipes and valves or pipes and water tanks located at height or in areas where access is difficult.

    Answer by: admin on 2019-06-06 10:03:27