Made In Britain

Delivering to UK-EU-Worldwide


KMPC1MP - K Type 1m Curly Cable Mini Plug to Mini Plug

TCWall-KA01-C - Single Socket TCWallPort with Integral K Fine Wire Probe Various Lengths

TCWALL-KA01-C - Single TCWallPort w/Integral K Fine Wire in Various Lengths

TCWALLPORT-D-KA01-C - Double TCWallPort w/Integral K Fine Wires in Various Lengths

As low as £22.50
Availability: In stock

Compatible Products


TCWALLPORT-D-KA01-C - Double Socket Thermocouple temperature monitoring points with two integral K Type thermocouple fine wire probes in a choice of lengths..

This item is designed to enable the testing of two points, often hot and cold pipes. Especially useful if there is difficult or impaired access, such as pipework and TMV's behind panels.



Fast – no waiting for temperatures to stabilize

Easy installation –

Can be wall mounted or recessed

Rear plate conduits allow user choice of wiring direction ie to the side, rear, top and bottom or combination of.

Each wire has a numbered label that identifies the corresponding socket on the front facia

Thermocouple Type - K

Accuracy - Class I (±1.5°C ±0.25%)

Measurement Range -100 to 250°C

Probe Dimensions (each) – Chosen length x 0.3mm

Box Dimensions – 52 x 52mm

Constructed from durable ABS plastic with a splash-proof design.

Front plate space for location/identification label or barcode label (label not included)

Custom made lengths can be quoted for upon request


Requires: A digital thermocouple thermometer and Connection Cable

 Double TCWallPort with MM2008


Handheld thermometer:

For Legionella Use we recommend the TME MM2008 Digital Handheld with Integral Timer

For Next Generation Bar Code Scanning Temperature Monitoring we recommend the TME MM7000-2D ThermoBarScan Thermometer

Connection Cable:

To connect between a handheld thermometer and your choice of TCWALLPORT-D-KA01we recommend the TME KMPC1MP

We found other products you might like!
Write Your Own Review
You're reviewing:TCWALLPORT-D-KA01-C - Double TCWallPort w/Integral K Fine Wires in Various Lengths
Your Rating

Related Posts

Product Faqs

Ask a Question

Ask a Question

Sort by   
  • Can I use TC Wall Ports to measure flow and return pipe temperatures on calorifiers?
    Question by: admin on 2018-06-21 12:06:20

    Yes. Simply attach a fine wire sensor to each pipe and connect each one to a Wall Port sited in a convenient position. We recommend using high-temperature duct tape to fix the sensors to the pipes.

    Answer by: admin on 2018-06-21 12:06:20
  • Can I use a TC Wall Port to measure temperature of water in a CWST?
    Question by: admin on 2018-06-21 11:27:18

    Yes. We recommend using a KM07 immersion probe to be hung in the tank and run to the Wall Port. This comes with a two metre cable as standard. Other lengths are available on request. Please see the diagram illustrating this on the TC Wall Port product page of our website.

    Answer by: admin on 2018-06-21 11:27:18
  • Does the TC Wall Port system replace conventional temperature monitoring?
    Question by: admin on 2018-06-21 11:23:25

    The TC Wall Port system happily works alongside conventional temperature monitoring using handheld immersion and surface probes. Its main advantage lies in simplifying temperature monitoring of points which are boxed-in or are difficult to access. If you have any doubts regarding the implementation of a water temperature monitoring regime in your building, you should consult your risk assessment and adhere to any recommendations contained therein.

    Answer by: admin on 2018-09-05 10:52:03
  • Can I use any thermometer with the TCWall Port?
    Question by: admin on 2018-06-20 14:56:29

    You will need a digital thermocouple thermometer with mini-plug input socket in order to read temperatures from your wall ports. We recommend our MM2008 Legionella Thermometer. You will also need a KMPC cable (such as the KMPC2MP) to connect your thermometer to the Wall Port. Thermistor and PT100 thermometers are not compatible with this product

    Answer by: admin on 2018-10-03 01:57:27
  • What is the purpose of the Red and Blue colour options for the TC Wall Port?
    Question by: admin on 2018-06-20 14:48:08

    Engineers often need to monitor both hot and cold pipes at the same location. The Red and Blue ports make it easy to tell which is hot and which is cold.

    Answer by: admin on 2018-06-20 02:48:08
  • What is the TCWall Port?
    Question by: admin on 2018-06-20 14:45:08

    The TC Wall Port is a wall-mounted temperature monitoring point, connected to a fine wire thermocouple temperature sensor. The tip of the sensor is permanently installed on the surface of the item you wish to take the temperature of, such as a water pipe or TMV inlet. Simply plug your thermometer into the port with a connector cable for an instant temperature reading. The port can be sited up to twenty metres from the test point making it ideal for use with boxed-in pipes and valves or pipes and water tanks located at height or in areas where access is difficult.

    Answer by: admin on 2019-06-06 10:03:27